ME60BT Bluetooth wireless Spa amplifier with waterproof control pad


ME60BT Bluetooth wireless Spa amplifier with Spa waterproof control pad

The ME60BT is a four channel, 120 Watts RMS Bluetooth wireless audio amplifier capable of delivering up to 30W RMS per channel. It has a compact, water resistant design that allows for flexible mounting possibilities. The control keypad is designed to use in a marine environment. And is a stand-alone system amplifier for any audio source, ideal for small watercraft/ATV’s/golf carts

The unit accepts either audio streamed via Bluetooth connection or hard wired input via RCA input. The waterproof control pad is easily mounted as the body of the keypad is threaded and the large mounting nut is tightened against the back side of the mounting surface.

Powers up to (8) 4ohm speakers
Internal distortion limiting circuits
Dedicated Subwoofer gain level control
External waterproof control pad included
Water resistant design for marine use
Rear channels switchable from full range to powered sub out

Keypad Controls:
Power: on/off
Input mode: Bluetooth or direct
Play/pause: available in Bluetooth mode
Track forward/repeat: available in Bluetooth mode
Volume up/down: available in Bluetooth and in the direct mode

Frequency Response: 20Hz-40 kHz
Speaker Impedance: 2-8 ohm
Output Power 2 ohm load: 30 Watts RMS per Channel (70W Peak)
Output Power 4 ohm load: 20 Watts RMS per Channel (50W Peak)
Low Pass Crossover: 18 – 245 Hz
Operating Voltage: 13.8V DC (10V-16V)
Maximum Current Draw (full power): 5-8 A
Dimensions (approx. w x h x d): 214mm x 106mm x 35mm (8.4” x 4.2” x 1.4”)
Installation Clearance: 250mm free space top/sides
Weight: 680 gram
Control pad Cable Length: 610 cm (240”)

ME60BT instruction manual


2 in stock



ME60BT Bluetooth wireless  Spa amplifier with waterproof control pad

Additional information

Weight 1970 g